Carpenters and machinists need strong...
Illustration
Carpenters and machinists need strong clamps to keep their work in place as they measure, cut, and weld. A clamp with poor holding power can result in inaccurate cuts and measurements that lead to waste. Consider this ad for the Taper Clamp, #1243 from Wixroyd International: "Small in size but with excellent clamping powers, the holding size of this low-profile clamp is many times greater than the load imposed by machine forces. The main feature of this popular clamp is its cross-wedge construction in both the horizontal and vertical planes. This feature that ensures the taper clamp is locked firmly in every direction as it is tightened down. As a result, all possibility of measurement error due to sliding is eradicated."
Death once was a clamp that held us firmly in its grip, but it couldn't hold Jesus, and because of Jesus' resurrection, it can no longer hold us.
Death once was a clamp that held us firmly in its grip, but it couldn't hold Jesus, and because of Jesus' resurrection, it can no longer hold us.
